Towing (259)

1 7/8" x 2" Greaseless AlumiBall Combo with towing capacity of 6,000 - 8,000 lbs. (for Rapid Hitch ONLY) Towing capacity 6,000 lbs for 1 7/8" ball and 8,000 lbs for 2" ball. Composite nylon cap snaps into place and precludes the need to lubricate the tow ball and trailer coupler. Lifetime replacement warranty on nylon cap! Lightweight, yet durrable rust free aluminum option for the Rapid Hitch. Meets V5 and SAE J684 certifications.

1/4" Coil Grade 30 ChainClevis Snap Hook on End37" Long5200lbs Capacity

1/4" diameter pin secures coupler latches, jack legs, pintle hooks and more Square retainer wire clip provides a quick latch and added clearance Constructed from high-strength steel Protected by a durable zinc-plated finish Notes: Before towing, be sure the safety pin is in place and securely fastened

1/4" diameter pin secures coupler latches, jack legs, pintle hooks and more Square retainer wire clip provides a quick latch and added clearance Constructed from high-strength carbon steel Protected by a durable zinc-plated finish Notes: Before towing, be sure the safety pin is in place and securely fastened

10" Drop/Rise Rapid Hitch with Plated Steel Combo Ball (1-7/8" x 2") 4" to 10" Drop GTWR: 7,500 lbs with 1-7/8" ball, 8,000 lbs with 2" ball Tongue Weight: 1,500 lbs Polished aluminum ball mount and rack won't rust, chip, or peel Quickly adjust height: Pull pin, adjust, slip pin back into place - done! Fits all standard 2" receivers. 2-1/2" Sleeve (part # and3800) required for 2-1/2" receivers Meets V5 and SAE J684 certifications. Made in the USA. Need Rapid Hitch Locking Pins? See part # and3429 or part # and3492.

10" Drop/Rise Rapid Hitch with Plated Steel Combo Ball (2" x 2-5/16") Features Include: 4" to 10" Drop GTWR: 8,000 lbs with 2" ball, 10,000 lbs with 2-5/16" ball Tongue Weight: 1,500 lbs Polished aluminum rack and ball mount won't rust, chip, or peel Quickly adjust height: Pull pin, adjust, slip pin back into place - done! Fits all standard 2" receivers. 2-1/2" Sleeve (part # AND3800) required for 2-1/2" receivers Meets V5 and SAE J684 certifications. Made in the USA.

10" Drop/Rise with Greaseless AlumiBall Combo (2" x 2 5/16") 4" to 10" Drop Greaseless AlumiBall - no need to lubricate tow ball and trailer receiver! Towing capacity: 8,000 lbs with 2" ball, 10,000 lbs with 2-5/16" ball. (1,500 Lbs Tongue Weight) Polished aluminum won't rust, chip, or peel. Quickly adjust height: Pull pin, adjust, slip pin back into place - done! Fits all standard 2" receivers. Sleeve required for 2-1/2" receivers (part #3800). Meets V5 and SAE J684 certifications. Lifetime replacement warranty on nylon cap!

Extends a 2" x 2" receiver tube by 18" Provides added clearance for a trailer or hitch-mounted accessory CNC-formed, robotically welded and mechanically descaled for a perfect fit Protected by a durable powder coat finish Made in USA Limited lifetime warranty (one-year finish, one-year parts)  

A versatile mount can be used with a wide range of pintle hooks. Strong and durable continuous weld construction. Corrosion-resistant powder-coated finish. Allows you to change mounting position to accommodate various trailer heights. Accepts the following Buyers Products pintle hooks: PH5, PH6, PH8, PH10, PH15, PH20 (drilling required), BH8. MGTW: 14,000lbs MVL: 2,800lbs Buyers Products 2 Inch Pintle Hook Mount slides into a 2 in. receiver to provide a mounting plate for a variety of pintle hooks and combination hitches. You can mount a pintle hook at either a high or low position to accommodate trailer height. The strong, durable construction features continuous welds and a black powder-coated finish for corrosion resistance. Product Common Use: Towing, Hauling

2" x 2 5/16" Plated Steel Combo Ball with towing capacity of 8,000 - 10,000 lbs. (for Rapid Hitch ONLY) Towing capacity 8,000 lbs for the 2" ball and 10,000 lbs for the 2 5/16" ball Meets SAE J684 and V5 towing standards Zinc Chrome Finish to reduce rust. For the Andersen Rapid Hitch ONLY

Specifications Color Black Finish Powder Coat Material Carbon Steel Maximum Gross Trailer Weight (M.G.T.W.) 20000 lb Maximum Vertical Load (M.V.L.) 3000 lb Mount Type Pintle Mount Shank Type Tubular Receiver Size 2.50 " Vertical Hole Spacing 1.75 " Horizontal Hole Spacing 3.375 " Mounting Hole Size 0.562 " Extension/Length 9.50 " No. of Mounting Positions 3

2" x 2-5/16" Plated Steel Combo Ball for 2-1/2" Shank Rapid Hitch ONLY Towing capacity: 10,000 lbs (2" ball) – 12,500 lbs (2-5/16" ball) Meets SAE J684 and V5 towing standards Zinc-plated finish to reduce rust. For the Andersen Rapid Hitch ONLY

Adapt any standard 2" shank to a 2-1/2" receiver!   High-qulaity all aluminum sleeve will never rust, chip or peel! Made with very tight tolerances to help prevent movement or chatter. 5.5" length Made in the USA  

Please note: Delivery may take 1-2 weeks from the order date. Smoother Safer Towing: Improves your ride, reduces wear & tear on pickup & trailer. 20,000 lb rated towing capacity with a cast 2 5/16″ heavy duty demco coupler. HD Airbag: Great for heavy duty trailers from end dumps to flat beds. Adjustable: Fine tune for your towing weight. Just add air for heavier loads. Shocker Air is designed with a built-in air bag for a smoother towing experience. Featuring a built in height adjustment plus weight adjustable. Just add or reduce air depending on the weight of your trailer and it’s contents. Quickly mounts to trailer tongue: Vertical channel or 4 bolt flat plate. 2 Mounting Options: Choose from vertical channel mount (fits 3-1/2″ OD / 3″ ID) wide vertical channel with 2″ center on center bolt pattern & secure with 5/8″ pins or bolts) or square plate 4 bolt mount (4-1/2″ square bolt pattern). Air Ride Technology: Built-in air bag for a smoother towing experience with built in height adjustment plus weight adjustable. Shock Absorbing Design: Built in 20k HD airbag with bump cushions absorbs the road bumps, jerks & bangs on whatever road you travel. Does not include trailer mounting bolts: For Vertical channel mount, most use 5/8″ bolts that are 4-1/2″ long or 5/8″ pins. Works with WD Hitches: This product WILL work with a weight-distribution hitch system. Vertical Channel Kit Available: Optional weld-on vertical tongue adapter available. Saves Money: By reducing trailer breakage on both the trailer and the trailer contents! The Shocker trailer tongue 20k air coupler absorbs the damaging forces experienced with a typical hard connection. This greatly reduces the chances of breaking welds and doing other long term damage to your equipment as well as the valuable cargo you have inside the truck and trailer. Adds Life To Your Trailer: Commonly used on end bumper and flatbed trailers. It adds life to your trailer. By reducing wear and tear on pickups driveline and frame as well as the frame of the trailer! Treat yourself, your equipment, and your passengers to a much smoother ride. You’ll never go back to the ‘old days’ of continual bumps, jerks, and vibrations. Improves Safety: By giving you improved control of your tow vehicle and trailer. The air bag coupler allows for better control of your pickup and the trailer it is towing. Shock Dampening Action: The 20,000 lb Shocker trailer tongue mount air coupler effectively absorbs the jerking, tugging and damaging forces experienced with a typical hard connection when towing trailers. There is no reason to beat yourself or your equipment up with a hard connection between your trailer and your receiver hitch. Provide Comfort: With a smoother ride! Travel a lot on concrete highways? No more jarring every time you cross a section divider. Your Shocker 20K air trailer tongue coupler absorbs the thumps and bumps. Simple Pivot Design: uses a rocker arm pivot design which produces a down and back motion, much different than other air hitches and couplers on the market. Our design eliminates the need for slides, parallel linkages, rollers, shock absorbers, or multiple air bags common to other air hitches. Note:  The main pivot bolt, or center pivot bolt, used in the Tongue Mount Shocker air coupler, is a custom made 1 inch diameter 1045 medium carbon steel bolt. Strategically heat treated to prevent wear and includes a machined grease passage for easy lubrication and maintenance. It should be noted that the yield strength of the 1″ pivot bolt exceeds the two 5/8″ bolts used to hold the typical ball coupler on the average vertical channel adapter. This does not include mounting bolts. Safety Notice: The Shocker air trailer tongue coupler is a heavy duty unit that in most cases exceeds factory receiver hitch weight capacities, therefore it is imperative that you always read and follow the tongue and towing weight recommendations of the receiver hitch that is mounted on your tow vehicle as wheel as the rating on your hitch ball and hitch ball mount. Ideal air coupler to bumper pull race trailers and dump trailers. Upgrade to air ride towing with any trailer with an a-frame that has a vertical channel or 4 bolt flat mount. Bolts to your trailer a-frame. The heavy-duty Shocker Air trailer tongue mount with a 2-5/16″ cast HD coupler is made for heavy duty trailer a-frames. Features at 20,000 lb towing capacity with a premium demco coupler. Upgrade your trailer coupler with air ride technology. Instant air ride for your trailer. This air bag trailer tongue coupler is great for reducing trailer fatigue and made for trailers and pickups with stiff suspension.  This trailer a-frame air ride coupler will smooth out your trailer towing experience. Plus is great if you have bumper hitch style trailer with an a-frame coupler mount. Great for tag trailers including an end dump trailer, race trailer, cargo trailer, skid steer tilt trailer or HD flat bed trailer and you never know what pickup truck will be hauling it.  The Shocker air trailer tongue coupler is attached to your trailer and ready for whatever truck is pulling it.  Simple bolt on installation in minutes. Choose from the vertical channel or square plate mount (4-1/2″ bolt pattern and bolts into place). Shocker air provides the ultimate smooth ride. The Shocker Air is a miniature air suspension unit mounted between your truck and trailer. This shock absorbing trailer tongue mount coupler is a must have for easier, safer, smoother heavy-duty trailer towing and pulling. The heavy duty air bag is mounted above the trailer tongue for maximum ground clearance. You will find the advantage of the Air Shocker trailer tongue coupler is your ability to adjust air pressure for best ride and load control.

30,000 lb maximum gross trailer weight (MGTW). 6,000 lb maximum vertical load (MVL). Fits 3 in. hitch receivers. Four mounting positions to accommodate different trailer heights. Durable solid-steel construction with a corrosion-resistant black powder-coated finish. Buyers Products 3 Inch Pintle Hook Mount slides into a 3 in. receiver to provide a mounting plate for pintle hooks and combo hitches. With four different mounting positions, you can easily install your pintle at the right height for your trailer. A 30,000-pound capacity ensures you have the strength needed to get the job done. The mount is made of durable steel with a solid shank. A black powder-coated finish provides exceptional corrosion resistance.

4" EZ HD 16K Hitch with 3" Shank   That's right, no need for an adapter sleeve on your 3" receiver!16K GTWR (on the 2-5/16" ball) - up from 14K on our 2" shank version!                4" Drop, 4" Rise 2" x 2-5/16" Combo Ball GTWR Towing Capacity: 10,000 lbs with 2" ball, 16,000 lbs with 2-5/16" ball Tongue Weight: 1,500 lbs Quickly adjust height: Pull pins, adjust, slip pins back into place -done! Fits all standard 3" receivers. Meets V5 and SAE J684 certifications. Made in the USA Need EZ HD Hitch Locking Pins? part # 3429 and part # 3439 Have a 2" receiver? No problem, we still offer our standard 4" EZ HD Hitch (part # 3294), rated at 14K GTWR. Have a 2-1/2" receiver? We also offer a 2-1/2" Shank 4" EZ HD Hitch (part # 3291), rated at 16K GTWR.

8" EZ HD 16K Hitch with 3" Shank   That's right, no need for an adapter sleeve on your 3" receiver!16K GTWR (on the 2-5/16" ball) - up from 14K on our 2" shank version!                8" Drop, 8" Rise 2" x 2-5/16" Combo Ball GTWR Towing Capacity: 10,000 lbs with 2" ball, 16,000 lbs with 2-5/16" ball Tongue Weight: 1,500 lbs Quickly adjust height: Pull pins, adjust, slip pins back into place -done! Fits all standard 3" receivers. Meets V5 and SAE J684 certifications. Made in the USA Need EZ HD Hitch Locking Pins? part # 3429 and part # 3439 Have a 2" receiver? No problem, we still offer our standard 8" EZ HD Hitch (part # 3298), rated at 14K GTWR. Have a 2-1/2" receiver? We also offer a 2-1/2" Shank 8" EZ HD Hitch (part # 3299), rated at 16K GTWR.

3/8" Coil Grade 70 Chain1 forged slip hook35" Long26400lbs Capacity

3/8" Grade 70 ChainSafety Hooks on Ends60" Long26400lbs Capacity6600lbs Breaking Strength